Expert Answers about Forest River Surveyor Travel Trailer
- Number of Panels on Adco SFS AquaShed Cover For 2016 Forest River Surveyor 226RBDS Travel Trailer
- There are three zippers to open up two panels at both the rear and the middle of the passenger's side for the Adco AquaShed that fits your 2016 2016 Forest River Surveyor 226RBDS travel trailer, which is the following:
- Adco SFS AquaShed Cover for Travel Trailer # 290-52243
The '16 Surveyor 226RBDS has a door at the rear on the passenger's side, so you will be able to easily open up the cover and access it with the AquaShed on if you want to gain entry.
The AquaShed # 290-52243 is...
view full answer... - Recommended Vent Cover Replacement For A 2016 Forest River Surveyor Travel Trailer
- Manufacturers do not list the vents they use for their RV's so since I do not know whether your model is a Ventline, MaxxAir, etc. I recommend using the Replacement Lid for Jensen, Ventline, Elixir, and Ventadome RV Roof Vents # A10-3375 which has brackets to make it compatible with every brand.
I also recommend the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip # MA86JR which will allow you use your vent during any weather and also while driving unlike standard roof vent cover models.
view full answer... - What Parts Are Needed to Use a Roof Top Tent on a CX Truck Cap
- To use a roof top tent like the Yakima SkyRise HD Tent # Y07437 on your CX Truck Cap that only has tracks, you would need to add crossbars. The A.R.E toppers use either Yakima or Thule tracks. Both of those would be compatible with the Replacement Yakima Control Tower # Y8890027 (you would need to get 4), the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 (you would need to get 2) and the Round 66" CrossBars for Yakima Roof Rack System # Y00410.
view full answer... - Towing Mirror Compatibility For A 2021 Ram Laramie Edition
- If your 2021 Ram Laramie is a 1500 then yes, you will be able to use the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side # LO34FR.
If you have a 2500 or 3500 you'll instead need the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side # LVT-3100C.
view full answer... - Can the Goal Zero Boulder 200 W Solar Charger be Connected to a Furrion Connector
- It is possible to connect the Goal Zero Boulder 200 Briefcase Solar Panel # 287-32409 to your 2018 Forest River Surveyor Travel Trailer. I spoke to a contact and he said you would need a 20 amp Charge Controller to regulate the solar input to the battery. He also said you would need a Furrion plug with bare wire negative and positive wires to connect to the solar panel.
You will not be able to run the refrigerator or other appliances, it is used to charge your battery.
view full answer... - Can I Use the Dexter EZ Flex Equalizers with 3500-lbs Axles
- I can understand why this might be confusing, and the Dexter EZ Flex # K71-652-00 will work with axles that have capacities up to 6000-lbs, so you would be under that capacity with your 3500-lbs axles. With that said, there will be some additional dimensions you want to confirm on the trailer to make sure it's going to work.
In order to make sure this system is completely compatible you will need to be confirm a few measurements. You'll want to be sure you are using 9/16" shackle bolts...
view full answer... - Replacement Tail Lights for a 2018 Forest River Surveyor
- I was able to find some photos of a 2018 Forest River Surveyor online and based on that it looks like the LED Trailer Tail Light part # 328-003-81LBM1 for driver side which has the license plate mount and part # 328-003-81BM1 for the passenger side will work. These tail lights are also LEDs so they shine brighter and last longer than incandescents.
view full answer... - Is There MORryde CRE3000 that Could Fit Wheelbase of 31 inches
- The MORryde CRE3000 # MR87ZR could work for your trailer but you need to take one more measurement. On your current equalizer measure the distance between the lower bolt hole centers. If that distance is 6-1/2 inches or pretty close to that this will work great for you. It's very likely this will work for you and your longer shackle straps are the reason for the difference in wheelbase.
view full answer... - Replacement Leaf Spring for 3500-lbs Axle on FR Surveyor 291BHSS
- Yes, those springs would be good replacements for your existing 3,500 lbs springs. In order to get an accurate measurement out of your current leaf springs you will need to jack your trailer up and let the suspension flex. Once you get all the weight off of one side of the trailer you will want to measure your springs from eye hole to eye hole. I have linked a diagram below that will show you the measurements you will need.
The etrailer 4-Leaf Double-Eye Spring for 3,500-lb Trailer item...
view full answer...
Go To Results